Audio Technica AT4049B Omnidirectional Condenser Microphone

The Audio Technica AT4049b consists of two modular subassemblies: an AT4900b-48 body and an AT4049b omnidirectional head capsule (both available separately). Additional interchangeable capsules are available in cardioid (AT4051b) and hypercardioid (AT4053b).

This versatile microphone may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

Highlights

• Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
• Omnidirectional polar pattern provides maximum ambient pickup
• Direct-coupled, balanced output results in a clean signal even under high-output conditions
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Switchable 80 Hz hi-pass filter and 10 dB pad
• Rugged turned-brass microphone housing for enduring dependability
• State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
• RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Technical Specifications

• Microphone Type: Condenser
• Polar Pattern: Omnidirectional
• Frequency Response: 20 Hz - 20 kHz
• Sensitivity: -34 dB
• Impedance: 50 ohms
• Maximum SPL: 145 dB
• Signal To Noise Ratio: 78 dB
• Power Requiremnets: +48V Phantom Power
• Connection: 3 Pin XLR (Male)

Whats In The Box

• Audio Technica AT4049B
• AT8405a stand clamp for 5/8"-27 threaded stands
• Windscreen
• Protective carrying case

Dimensions

• Width: 155 mm
• Height: mm
• Depth: 21 mm
• Weight: 0.126 Kg