Finest quality components At the heart of the LCT 441 lies a 1" true condenser capsule. This premium component enables you to capture any instrument or vocalist with exceptional results. Keen to provide you with the very best quality microphones, Lewitt test each and every capsule. If it's not up to their standards then it doesn't leave the factory.
Easy to read, LED monitoring When you're recording it's important that you're aware of your gain-staging at all times. If a signal is too "hot" then clipping will occur. Whilst desirable in the analog age, in digital recording this damage is often irreparable and will make you look unprofessional. However, if you're using the LCT 441 then you don't need to worry about such things. The intuitive, easy-to-read LED status ensures you're in the green at all times. You'll be able to easily detect if you're in the danger zone as the LED will change from green to red. Simply back off your level to avert a crisis!
Oblique Strategies Random mode is Lewitt's answer to Brian Eno's Oblique Strategies. If you're struggling for inspiration hold down the right button for over five seconds to randomly choose a polar pattern. Who knows. Your signature sound may be moments away!
Highlights
- Compact size ensures optimised positioning
- Wide array of polar patterns provides an incredible range of tonal variety
- Plosives are rendered a thing of the past with the magnetic pop filter
- Utilise the transport bag to easy store when not in use
- Reduce the risk of low-frequency energy with the included shock mount
- Windscreen guarantees high-quality results when recording on-location
Technical Specifications
- Type: Condenser, externally polarized
- Acoustical operating principle: Pressure gradient transducer
- Diaphragm: 3 micron gold sputtered Mylar
- Transducer: 25.4 mm, 1 in
- Polar pattern: Omni, wide cardioid, cardioid, supercardioid, figure-8, reverse cardioid, reverse wide cardioid, reverse supercardioid
- Sensitivity: 17.2 mV/Pa, -35.3 dBV/Pa
- Equivalent noise level: 7 dB (A), cardioid
- Max. SPL for 0.5 THD: 144 dBSPL
- Signal / noise ratio: 87 dB (A)
- Dynamic range: 137 dB (A)
- Supply voltage: 48 V ± 4 V
- Current consumption: 4 mA
- Internal impedance: 54 ohm
- Rated load impedance: 1000 ohms
- Connector: Gold plated 3-pin XLR
- Mic enclosure: Zinc die cast
- Microphone dimensions: 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in
- Microphone net weight: 325 g, 11.5 oz
Whats In The Box
- Shock mount
- Magnetic pop filter
- Windscreen
- Transport bag
