RME Fireface 802 FS 60-Channel High-end 192 kHz USB Audio Interface
Pay /mo. at % APR. Learn more
18+, T&C apply, Credit subject to status.
Enjoy peace of mind at no extra cost
Key Info
Alongside 60 channels (30 inputs / 30 outputs) of analogue and digital I/O, the Fireface 802 FS benefits from newly developed analogue and digital circuitry with improved performance, as well as a host of professional features.
Like all RME audio interfaces, the Fireface 802 FS benefits from TotalMix FX, RME's digital high-end mixer and signal router. Driven by powerful DSP with integrated EQ, Dynamics and Reverb/Echo effects at up to 192 kHz, plus a built-in monitoring controller, TotalMix FX offers powerful, flexible control of all audio channels.
The full-blown feature set also includes optional Class Compliant mode and operation with TotalMix FX for iPad, RME's app to fully control the 802 FS from the iPad, without any computer. The easy-to-use app includes metering for all 60 channels plus effects bus, different setup screens, and complete control of all features.
Enhance Your Recording Setup - Discover Unmatched Flexibility
The Fireface 802 FS benefits from ultra-low latency operation thanks to RME’s renowned USB driver technology and driver stability. SteadyClock FS jitter suppression, individually switchable reference levels for all inputs and outputs and identical operation on Windows PC and Mac completes the package.
Professional High-Transparency Preamps
The Fireface 802 FS features four crystal-clear preamps with ultra-low latency converters, using the classic technology of the OctaMic II, a high-end preamp providing supreme sonic quality.
USB 2 Class Compliant Audio
The Fireface 802 FS operates in two different modes: driver-based USB 2 and Class Compliant. The Class Compliant mode is a standard that is natively supported by operating systems like Windows, Mac OSX and Linux distributions. No proprietary drivers are required, the device will be directly recognized when the CC firmware is loaded. The alternative CC mode can be activated via a recessed pushbutton switch directly at the back of the interface.
Powerful Applications for Mixing, Monitoring and Measurement Included
The Fireface 802 FS comes with the TotalMix FX DSP mixer offering comprehensive routing and monitoring options, as well as the DigiCheck Analyzer allowing to measure and analyse the digital data feed in both directions with maximum precision.
DC-Coupled Outputs - CV/Gate Voltage Control
Most audio interfaces are traditionally designed with what is called 'AC-coupled outputs', where capacitors are used to filter out any extreme low frequencies.
ARC USB - Plug'n Play Plus
The optional available ARC USB connects to your computer via USB and talks to TotalMix FX directly. It has 15 freely assignable and illuminated buttons, one encoder wheel, and a TS jack to connect a foot switch.
Standalone Operation with Setup Recall
The Fireface 802 FS can be set up and configured directly via iPad, MIDI remote and ARC USB. Additionally 6 memory slots are present where the current configuration can be stored permanently. This way the 802 FS operates independently from a computer. In stand-alone operation it can turn itself into different devices by the simple push on a button.
ICC
Intelligent Clock Control not only displays every clock status, but will also retain the last valid input sample rate in case of failure of the external source. Other renowned RME technologies like SyncCheck offer a quick detection of clock problems.
Highlights
- 30 Input / 30 Output channels
- 12 x Analogue I/O
- 4 x Mic/Instrument Preamp
- 1 x AES/EBU I/O
- 2 x ADAT I/O (or 1 x ADAT I/O plus 1 x SPDIF I/O)
- 1 x Word Clock I/O
- 1 x MIDI I/O
- SteadyClock FS
- TotalMix FX
Technical Specifications
- AD, Line In 1-8, rear
- Input: 6.3 mm TRS, electronically balanced
- Signal to Noise ratio (SNR) @ LoGain: 116 dB (AES17), 118 dBA
- Signal to Noise ratio (SNR) @ +4 dBu: 115 dB (AES17), 117 dBA
- Frequency response @ 44.1 kHz, -0.1 dB: 8.9 Hz – 20.4 kHz
- Frequency response @ 96 kHz, -0.5 dB: 4.3 Hz – 45.2 kHz
- Frequency response @ 192 kHz, -1 dB: 3 Hz – 89 kHz
- Filter: Short Delay Sharp, 5 / 5 / 6 samples delay
- THD @ -1 dBFS: < -120 dB, < 0.0001 %
- THD+N @ -1 dBFS: < -110 dB, < 0.00032 %
- Channel separation: > 110 dB Maximum input level: +19 dBu
- Input: 6.3 mm TRS jack, electronically balanced
- Input impedance @ 1 kHz: 10 kOhm unbalanced, 10.6 kOhm balanced
- Input sensitivity switchable between Lo Gain and +4 dBu
- Input level for 0 dBFS @ Lo Gain: +19 dBu
- Input level for 0 dBFS @ +4 dBu: +13 dBu
- Variable digital gain: 0 to +12 dB
- Minimum level for 0 dBFS: +1 dBu, -1.2 dBV
- Microphone In 9-12, front
- As AD, but:
- Input: 6.3 mm TRS, electronically balanced
- Signal to Noise ratio (SNR) @ LoGain: 116 dB (AES17), 118 dBA
- Signal to Noise ratio (SNR) @ +4 dBu: 115 dB (AES17), 117 dBA
- Frequency response @ 44.1 kHz, -0.1 dB: 8.9 Hz – 20.4 kHz
- Frequency response @ 96 kHz, -0.5 dB: 4.3 Hz – 45.2 kHz
- Frequency response @ 192 kHz, -1 dB: 3 Hz – 89 kHz
- Filter: Short Delay Sharp, 5 / 5 / 6 samples delay
- THD @ -1 dBFS: < -120 dB, < 0.0001 %
- THD+N @ -1 dBFS: < -110 dB, < 0.00032 %
- Channel separation: > 110 dB Maximum input level: +19 dBu
- Input: 6.3 mm TRS jack, electronically balanced
- Input impedance @ 1 kHz: 10 kOhm unbalanced, 10.6 kOhm balanced
- Input sensitivity switchable between Lo Gain and +4 dBu
- Input level for 0 dBFS @ Lo Gain: +19 dBu
- Input level for 0 dBFS @ +4 dBu: +13 dBu
- Variable digital gain: 0 to +12 dB
- Minimum level for 0 dBFS: +1 dBu, -1.2 dBV
- Instrument In 9-12, front
- As AD, but:
- Input: XLR, electronically balanced
- Input impedance: 3.4 kOhm
- Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA
- Gain range: 54 dB
- Maximum input level, Gain +6 dB: +10 dBu
- Maximum input level, Gain +60 dB: -44 dBu
- CLIP LED: 0 dBFS
- SIG LED: -42 dBFS
- DA, Line Out 1-8, rear
- Output: 6.3 mm TRS jack, servo-balanced
- Signal to Noise ratio (SNR) @ HiGain: 116.5 dB (AES17), 118.5 dBA
- Signal to Noise ratio (SNR) @ +4 dBu: 116 dB (AES17), 118 dBA
- Signal to Noise ratio (SNR) @ -10 dBV: 107 dB (AES17), 109 dBA
- Frequency response @ 44.1 kHz, -0.1 dB: 0 Hz – 20.2 kHz
- Frequency response @ 96 kHz, -0.5 dB: 0 Hz – 44.6 kHz
- Frequency response @ 192 kHz, -1 dB: 0 Hz – 77.5 kHz
- THD+N: < -110 dB, < 0.00032 %
- Channel separation: > 110 dB
- Output level switchable Hi Gain, +4 dBu, -10 dBV
- Output level at 0 dBFS @ Hi Gain: +19 dBu
- Output level at 0 dBFS @ +4 dBu: +13 dBu
- Output level at 0 dBFS @ -10 dBV: +2 dBV (+4.2 dBu)
- Output impedance: 75 Ohm
- DA - Stereo Monitor Output Phones (9-12)
- As DA, but:
- Output: 2 x 6.3 mm TRS stereo jack, unbalanced
- Maximum output level at 0 dBFS: +17 dBu
- Max power per channel @ 32 Ohm load, 0.02% THD: 200 mW (2.5 Vrms, +10 dBu)
- Signal to Noise ratio (SNR): 116 dB (AES17), 118 dBA
- Output impedance: 2 Ohm
- AES/EBU
- Input:
- 1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
- High-sensitivity input stage (< 0.3 Vpp)
- SPDIF compatible (IEC 60958)
- Accepts Consumer and Professional format
- Lock range: 27 kHz – 200 kHz
- Jitter suppression: > 50 dB (> 1 Hz)
- Output:
- 1x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
- Output level Professional 4.2 Vpp, Consumer 2.4 Vpp
- Format Professional according to AES3-1992 Amendment 4
- Format Consumer (SPDIF) according to IEC 60958
- Single Wire mode, sample rate 28 kHz up to 200 kHz
- ADAT Optical
- Input:
- 2 x TOSLINK, format according to Alesis specification
- Standard: 2 x 8 channels 24 bit, up to 48 kHz
- Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
- Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
- Bitclock PLL ensures perfect synchronisation even in varispeed operation
- Lock range: 31.5 kHz – 50 kHz
- Jitter suppression: > 50 dB (> 1 Hz)
- Output:
- 2 x TOSLINK, format according to Alesis specification
- Standard: 2 x 8 channels 24 bit, up to 48 kHz
- Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
- Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
- SPDIF optical (via ADAT2)
- Input:
- 1 x optical, according to IEC 60958
- Accepts Consumer and Professional format
- Lock range: 27 kHz – 200 kHz
- Jitter suppression: > 50 dB (> 1 Hz)
- Output:
- Format Consumer (SPDIF) according to IEC 60958
- Sample rate 28 kHz up to 200 kHz
- Word Clock
- BNC, switchable termination
- SKU:
- FF802FS
- Model Name:
- Fireface 802 FS
- Brand:
- RME
UK Delivery
FREE Standard Delivery on orders over £99.00.
Orders placed before 4pm will normally be dispatched the same day.
Please refer to our delivery schedule for exceptions.
Delivery Upgrade Options (Over £99)
- DPD Express Next Working Day - £4.99
- Next Working Day Pre 12pm - £8.99
- Saturday / Sunday - £9.99
At Music Matter, our goal is to ensure complete satisfaction with your purchase.
If, for whatever reason, you are dissatisfied with your purchase, you can return it to Music Matter within 30 days of receiving the item, providing it arrives back in new condition.
You have the option of receiving a full refund / exchange within 14 days, or, exchange / credit only within 30 days.
Full Refund Within 14 days
In order to receive a full refund, you must notify us within 14 days of receiving the goods. Once you have notified us you will have 14 days to return the product to us.
Exchange Within 30 days
In order to exchange an item, you must notify us within 30 days of receiving the goods. Once you have notified us you will have days to return the product to us.
Goods received back 14 days after the cooling of period ends may be rejected.
Your returns period starts the day after you receive the item(s)
Click here to view our full Returns Policy.
Secure Online Payment Powered By Braintree
We accept the following debit / credit cards:
Paypal
Pay for your item(s) in just a few clicks with PayPal.
Pay Later with PayPal Pay in 3
Split purchases into three interest-free monthly payments at millions of stores online.
Subject to status. UK residents only. Late fees apply. PayPal is a responsible lender. Pay in 3 performance may influence your credit score. T&Cs apply.
Check out securely with PayPal and choose Pay in 3 from your account.
Subject to status. Terms and Conditions apply. UK residents only. PayPal is a responsible lender. Pay in 3 performance may influence your credit score. PayPal Pay in 3 is a trading name of PayPal (Europe) S.à.r.l. et Cie, S.C.A., 22-24 Boulevard Royal, L-2449, Luxembourg.
Click here to learn more about Pay in 3.
PayPal Credit
0% interest for 4 months is available on single transactions of £99.00 or more.
PayPal Credit is like a credit card, without the plastic. It's a credit limit that's attached to your PayPal account which you can use for your online purchases.
Check out securely with PayPal and choose PayPal Credit to apply for credit.
Finance provided by PayPal Credit. Credit subject to Status. Terms and Conditions apply. Music Matter acts as a broker and offers credit from PayPal Credit. PayPal Credit is a trading name of PayPal (Europe) S.à.r.l. et Cie, S.C.A., 22-24 Boulevard Royal L-2449, Luxembourg.
Minimum 12 Months Warranty
All new & used goods supplied by Music Matter are warranted free from defects for 12 months from the date of supply (unless otherwise stated).
Extended Warranty
Many manufacturers offer a free extended warranty upon registration.
