Tonebone Bassbone V2 Bass control preamp & switcher

Dual Bass Connections & Powerful EQ

Simply stated, the Bassbone V2 is a bass command center. Connect any two basses and seamlessly toggle between them using a footswitch. Each channel has a separate level control to balance the two instruments and is augmented with a unique EQ that enables you to adjust the tone to match your bass amp. In fact, the passive-interactive EQ is so powerful, you can toggle between channels to emulate switching from a P-Bass to a Rickey using the same bass! A special PZB booster adds yet another dimension - allowing you to connect a piezo, such as used on an upright bass when doubling.

Boost Switch & Effects Loop

A boost footswitch can be used to either engage a power booster for solos or can be assigned as a mute switch for quiet on-stage tuning. A third footswitch lets you activate the effects loop which is equipped with a wet-dry control to retain the tone of the original instrument and then mix-in as much of the effect as you like. The effects can be assigned to either channel or both. Once processed, you can send your sound to a stage amp, tuner and to the PA system using the built-in Radial DI box.

Highlights

• Two-channel preamp for one or two instruments
• 3-band EQ on channel 2
• Main output for stage amp
• Built-in DI box with balanced output for PA/mixer
• Combination power boost/cut footswitch with level control
• Effects loop with send & receive jacks and wet/dry control
• Piezo-optimised input for upright bass
• Dedicated tuner output